Guralp-systems CMG-6T Manual do Utilizador descarregar pdf (Página 28)

CMG-6T

4 Connector pin-outs

4.1 Instrument, HCU RECORDER and SENSOR connectors

This is a standard 26-pin “mil-spec” plug,

conforming to MIL-DTL-26482 (formerly

MIL-C-26482). A typical part-number is

02E-16-26P although the initial “02E” varies

with manufacturer.

Suitable mating connectors have part-

numbers like ***-16-26S and are available

from Amphenol, ITT Cannon and other

manufacturers.

Pin Function Pin Function

A Velocity +ve, vertical channel P Calibration signal (all channels)

B Velocity –ve, vertical channel R Calibration enable (all channels)

C Velocity +ve, N/S channel S not connected

D Velocity –ve, N/S channel T not connected

E Velocity +ve, E/W channel U One-second response mode

F Velocity –ve, E/W channel V not connected

G Mass position, vertical channel W not connected

H not connected X not connected

J Mass position, N/S channel Y Logic ground

K not connected Z not connected

L Mass position, E/W channel a not connected

M not connected b Power ground

N Signal ground c Power +ve

Wiring details for the compatible socket,

***-16-26S, as seen from the cable end, i.e.

during assembly.

28 Issue B

1 2 ... 23 24 25 26 27 28 29 30 31

Sem comentários

Guralp-systems CMG-6T Manual do Utilizador Página 28