Guralp-systems Scream Manual do Utilizador Página 140
- Página / 142
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Scream! 4.5
scream-directory/ : The default directory for log files. You can
change this: see Chapter 11 on page 126.
14.4 Error messages
Unable to detect configuration
Scream! has not been able to retrieve the current configuration from a
digitiser. This can happen because
• The device is not connected.
• The communications link is one-way (simplex). Scream! needs
reliable two-way communications to discover the digitiser's
set-up. However, you can still receive data over a simplex link.
• The device is heavily loaded, and Scream! times out waiting for
a response from it.
• The network between Scream! and the computer hosting the
device is slow or unreachable. You can check this using the
standard command ping ip-address to check that the remote
computer is responding.
If your computer is on the same network as the remote device, it
must be on the same subnet as that device, or it will need to
connect through a gateway machine.
It is recommended that you wait for data to be received from the
digitiser before you attempt to configure it.
Unable to save program status
The Scream.ini file could not be opened for writing. This can
happen because
• The file or disk are write-protected.
• You do not have the right privileges to change the file.
• The file is in use by another program.
Unable to write to stream
An error occurred when Scream! tried to write a data block to the disk.
This can happen because
140 Issue K
- Scream! 4.5 1
- Table of Contents 2
- 1 Introduction 6
- 1.1.1 Diagnostic features 7
- 1.1.2 Digitiser configuration 7
- 1.1.3 Networking 7
- 1.1.4 Recording and replay 7
- 1.2 Scream! as a data viewer 8
- 2.1 Installation on Windows 9
- 3 The main window 11
- 3.2 The stream buffer 14
- 3.3 The source tree 14
- 3.3.1 Icons 15
- 3.4 The stream list 16
- 3.4.1 Sorting options 18
- 3.5 The status bar 19
- 3.6 Viewing streams 19
- 3.7 Connecting to instruments 21
- 3.8 Calibration data 21
- Serial-Nos=serial-number 22
- VPC=sensitivity 22
- CALVPC=sensitivity 22
- CALRES=resistance 23
- TYPE=model-number 23
- RESPONSE=response-type unit 23
- GRAVITY=acceleration 24
- 3.8.1 Examples 25
- 3.9 Other features 26
- 4 Waveview windows 27
- 4.1 Window functions 28
- 4.1.2 Making measurements 29
- 4.1.3 Printing 30
- 4.1.4 Filtering 30
- 4.1.5 Paused mode 31
- 4.1.6 Other icons 34
- 4.1.7 Context menu 35
- 4.2 Stream functions 36
- 4.2.1 Identifying streams 37
- 4.2.3 Scaling streams 38
- 4.2.5 Spectrogram 39
- 4.3 The Filter Design window 40
- 4.3.1 Filter parameters 41
- 4.3.2 Viewing spectra 44
- 4.3.3 Display options 46
- 4.3.4 Pre-sets 47
- 4.4 Display options 48
- 4.4.2 Stream mapping 49
- 5 Networking 53
- 5.1.1 TCP clients 55
- 5.1.2 Multicast clients 55
- 5.2 My Server 56
- 5.3 Server Buffer 59
- 5.4 Gap recovery 59
- 6 Supplementary windows 63
- 6.1.2 Macro commands 65
- 6.1.3 Direct connections 65
- 6.2 Digitiser status streams 66
- 6.2.1 GPS 67
- 6.3 The summary window 70
- 6.3.1 Timing 71
- 6.3.2 Mass position 71
- 6.3.3 Age 72
- 6.3.4 Errors 72
- 6.3.5 Triggers 72
- 6.4 The ViewInfo window 74
- 7 Configuring digitisers 76
- 7.1 System ID 77
- 7.2 Output control 78
- 7.3 Triggering 80
- 7.3.1 STA/LTA 81
- 7.3.2 Level 85
- 7.3.3 External triggering 85
- 7.4 Mux Channels 86
- 7.5 Ports 87
- 8 Controlling digitisers 89
- 8.2 Triggering 90
- 8.3 Calibration 91
- 8.4 Mass Control 92
- 8.5 Data flow 93
- 8.5.1 DIRECT 94
- 8.5.2 FILING 95
- 8.5.3 DUPLICATE 96
- 8.5.4 DUAL 97
- 8.5.6 ADAPTIVE 98
- 8.6 Buffer Memory Usage 99
- 8.6.2 WRITE-ONCE 100
- 9 Recording and playback 101
- 9.2 Files 103
- 9.2.1 UFF file format 106
- 9.2.2 MiniSEED file format 107
- [ExportInfo] 108
- SYSTID=net:NN loc:LL 108
- 9.2.3 SAC file format 109
- 9.2.4 SUDS file format 110
- 9.2.5 GSE file format 111
- 9.2.6 CSS file format 111
- 9.3 Playback 112
- 9.3.2 Reading hard disks 115
- 9.3.3 SCSI tapes 116
- 9.4 Automatic playback 117
- 10 Printing options 119
- 10.1.2 Automatic screen-shots 121
- 10.2 Continuous printout 122
- 10.2.1 Port capturing 125
- 11 Logging and notification 126
- 11.2 E-mail notification 128
- 12 Extending Scream! 130
- 12.2 Running extensions 131
- 13 Keyboard short-cuts 133
- 13.2 Waveview windows 134
- 13.3 Details window 135
- 136 Issue K 136
- 14 Inside Scream! 137
- 14.2 The calvals.txt file 138
- 14.3.2 Linux version 139
- 14.4 Error messages 140
- • The disk is full 141
- 15 Revision history 142
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.166 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais